Eaton proportional cartridge valves are primarily two-way flow regulators ESV1-10 and three-way EFV2-12. As a standard, the offer is complemented by Eaton ERV1 proportional overflow valves (also in the IRV1 and IRV2 fan drive version) and the increasingly used Eaton EPRV reduction and overflow valves. It is also possible to make a special block combining several functions, but in this case please contact us.

Cartridge solenoid valves – this is the fastest growing product group in the field of hydraulic cartridge valves. The main advantage is the possibility of any installation and configuration. We distinguish between two-way valves Eaton SBV1-10, SBV11-10, In the option of locking in one direction Eaton SV3-10, SV13-10. The three-way valves include Eaton SV4-10 valves. There are definitely more options, so we invite you to familiarize yourself with the catalog.

Eaton places great emphasis on solutions ready for various applications. Especially a lot of solutions have been developed for orbital motors (with an emphasis on Char-Lynn engines) Eaton 1CLLROMP150, CEOMP35. Due to the fact that these are cataloged products, they are affordable. It is worth paying attention to the richness of types of hydraulic motors that Eaton has in its offer

The offer is complemented by Eaton MRV, MSV manual distributors used either for emergency overdrive or for changing the direction of flow in simple applications. Thanks to the PTS1-10 logic valves, we can create interesting special solutions by combining them with distributors.

There is practically no hydraulic scheme in which there is not at least one non-return valve, and this is protecting the pump, keeping the actuator in position or preventing the cavitation of the motor. Mainly we mean here the Valves Eaton CV3-10, CV13-10, or the most famous of this group and still common Eaton 4CK30, 4CK90.

The flow rate control valves are primarily Eaton FR2-10 two-way flow regulators, as well as three-way Eaton PFR2-10 and Eaton PFR12-10 depending on the pressure. An interesting product enabling the so-called "multifunctionality" are Eaton PCS3-10, PCS13-10 compensators

In addition to flow, pressure is the main parameter characterizing the power hydraulics. The most important valve in the system is the safety valve that protects the system against too much pressure and, consequently, failure. The most commonly used valves include Eaton RV1-10, 3-10, 5-10, 8-10, and they are distinguished primarily by working pressure and maximum flow. Sometimes in the hydraulic system we have two systems working at different pressures, then we use Reduction or Reduction and Overflow valves Eaton PRV1-10, 2-10, 12-10. In more complex systems or sequences of movements, it is worth getting acquainted with Eaton 1PSC30 sequential valves. Also noteworthy is the overflow valve, ventilated Eaton 1VR100, 1VR150 and frequently occurring Eaton RV8-10 valves.

Logic valves are often used in applications where valve combinations or sequences of valves are needed. The most common valves Eaton DPS2-10, DPS2-8.

Eaton offers a wide range of bodies. The most commonly used are sizes 10 – Eaton 02-175462, 876702, 876703, 02-175102, and sizes 8 – Eaton 02-160727, 02-160728, 02-160733, 02-160734. You can choose from valve accessories such as knobs, flow reduction venturis or check valves.

Eaton cooperates with many large manufacturers, thanks to which it introduced the Eaton 39055-Faz valve for leveling e.g. a bucket in two planes. This is especially needed in wheel loaders.

Vickers in the past was the most widely used manufacturer in the industry. Glass valves are still successfully used today: they consist of an Eaton Vickers CVCS lid and an Eaton Vickers CVI cartridge valve. There are endless options at the forefront of the position monitoring version (open /closed valve) which gives us a lot of room for maneuver when building a new machine.

Hydraforce is particularly known for its mobile applications – pressure up to 210/240 bar where cartridge solenoid valves have been and are successfully used. This mainly applies to the Hydraforce SV10-20, 21, 22, 28, 29 series and the SF08-22 series. As applications are increasingly demanding, as well as industrial applications increasingly use cartridge valves, Hydraforce has released a version of the Hydraforce HSV10-20, 21, 22, 28, 29, which can operate even at pressures up to 420 bar. The offer also includes 3-way V58-30 distributors, as well as 5-way distributors, e.g. Hydraforce SV10-59D. More information on the manufacturer's website or on the www.hydraforce.pl.

Hydraforce proportional valves are the most interesting product group, as more and more companies are giving up mechanical control and replacing it with electric ones. Most often these are proportional flow regulators Hydraforce PV72-30, SP10-20, HSP10-20, as well as pressure reducing and overflow valves Hydraforce TS10-36 and overflow TS58-20. A separate group here are overflow valves for the fan (with the opposite effect than standard overflow valves, i.e. with increasing current intensity, the pressure decreases) Hydraforce TS10-27. Complemented by proportional slide distributors controlling not only the direction, but also the flow rate of Hydraforce SP10-57, 58.

We distinguish 2 types of flow control in hydraulic systems. The first are throttling valves, e.g. Hydraforce NV10-20 or throttling Hydraforce FC10-20, which regulate the flow, which still depends on the pressure in the system. Currently, two-way regulators Hydraforce FR50-28 with compensation and three-way regulators with Hydraforce FR10-39 compensation are more often used in machines, where variable pressure has less impact on the flow. There is also a noticeable trend of modernization of machines with only throttling valves by inserting compensators, e.g. Ec50-30i thus obtains a compensated flow regulator. For the synchronization of actuators, the Hydraforce FD50-45 stream divider is used depending on the given flow and the division of the stream – more information in the directories.

Pressure valves are mainly Hydraforce RVD50-20 overflow hydraulic valves, which are characterized by high flow (in relation to the size of the seat) and very fast response, which is why they can be used especially in systems with very high dynamics. For less demanding applications, Hydraforce RV10, 50 valves are used. Increasingly, Hydraforce PR50-36 reduction and overflow valves are used to protect the system, control pumps and more. Sequential valves that allow you to make movements without the need for additional hydraulic distributors Hydraforce PS10-30, Hydraforce PS10-40 are still underestimated.

Hydraforce hydraulic distributors are the largest product group of this manufacturer. Starting with hydraforce EP10-S38 glass cartridge valves, whose main advantage is a small drop in pressure flowing through the oil valve, as well as the possibility of any valve configuration through the use of a suitable remote control. Increasingly, hydraulic valves are used that are indirectly controlled, especially in proportional systems, due to significant savings in money and space compared to standard plate valves. Applies to Hydraforce PD10-30 two-way valves, Hydraforce PD10-40 three-way valves and Hydraforce HPD42-S67C four-way valves. An indispensable element in current systems – especially with the LS line – are Hydraforce LS10-30, Hydraforce LS50-30 circulation switches and Hydraforce CV10-30, Hydraforce HCV10-30 check valves. More interesting Hydraforce products in catalogs.

The main goal of Hydraforce is the slogan "compact without the compromise". For this reason, the company introduces many solutions, as well as individual valves that facilitate, simplify systems, and thanks to which the entire blocks are smaller and the layout looks neater. The most interesting valves are Hydraforce SVRV10-26, PC10-38, RVCV56-20, HSPEC12-30A, HSPEC12-34, EPFR50-S35.

Hydraforce develops products for special customer requirements. The main goal is to develop energy-saving solutions such as the Hydraforce HTD10-40 torque divider or a place like the Hydraforce HCV16-30 three-way check valve. On the other hand, the largest sales are guaranteed by the sale of special valve blocks and valves for transmission. Do you have a question or problem? Please contact us.

Hydraforce specializes in so-called "custom" solutions. This does not change the fact that in its offer it also has standard elements – such as bodies. The most common are: Hydraforce 7028240, 7028330, 7151450, 7151540, 7151050, 7151150. If you need special solutions, please contact us.

Deutsch plugins are a consequence of market expectations. Even in everyday life, we use devices that meet higher and higher standards. Thanks to the use of Deutsch plugs, our system can meet IP69K standards, which means that it is completely dustproof and protected against high-pressure spraying. Mainly such expectations have marine applications and the market of mobile machines with an emphasis on municipal.

Eaton brake valves. This product does not need to be introduced to anyone, as Eaton has the widest range of hydraulic brake valves on the market. It is enough to mention the most famous Eaton 1CE30, 90, 120 and in the version with partial or full pressure relief springs Eaton 1CER, 1CEB, 1CEBD. The offer also includes several special valves that have permanently entered the catalog.